5024-001
Duplex Solenoid (L) Assembly Removal
1. Remove the paper guide bottom. See
Bottom Removal" on page
2. Remove the harness cover.
3. Remove the solenoid (L) harness connector CN3 from the relay
P.W.B.
4. Remove the harness from the clamp.
5. Remove the set screw ST3X5 (1) from the solenoid.
6. Remove the solenoid (L) assembly.
WARNING: Put the actuator in the lever hole of the switching
shutter L while assembling the solenoid (L).
"Duplex Paper Guide
4-119, for more information.
Repair Information
4-133