5024-001
Interlock Switch (Rear) Removal
1. Remove the side cover (L). See
page
4-10, for more information.
2. Remove the high voltage power supply unit. See
Power Supply Unit (HVU) Removal" on page
information.
3. Remove the transfer drum. See
page
4-81, for more information.
4. Remove the transfer unit. See
page
4-79, for more information.
5. Remove the set screws ST3X6 (2) from the transfer electrode
base.
6. Remove the transfer electrode base from the frame.
7. Disconnect all harness connectors to the interlock switch.
"Side Cover (L) Removal" on
"Transfer Drum Removal" on
"Transfer Unit Removal" on
Repair Information
"High Voltage
4-33, for more
4-61