5024-001
Transfer Drum Removal
1. Remove the toner cartridges.
2. Remove the belt cartridge.
3. Remove the fuser unit.
4. Remove the cleaner cover.
5. Remove the drum cleaner.
6. Open the transfer unit.
7. Remove the top cover assembly. See
Removal" on page
8. Remove the set screws ST4X6 (2) from stay 'A'.
9. Remove the stay 'A' assembly.
WARNING: Wrap the transfer drum surface with paper so the
transfer drum will not be scratched. (The transfer drum, as a
maintenance part, has a protective sheet.)
10. Pull the transfer drum, from the top side, and remove it from the
shaft support.
11. Pull up and remove the transfer drum from the top.
4-12, for more information.
"Top Cover Assembly
Repair Information
4-81