Front Cover Unit Removal - Lexmark C720 Service Manual

5024-001

Front Cover Unit Removal

1. Open the front cover.
2. Remove the cover C. See
Motor Assembly) Removal" on page
information.
3. Remove the front cover. See
page 4-22, for more information.
4. Disconnect the bottom of the hinge support from the front cover
unit.
5. Remove the set screws BT4X10 (4) from the front inner cover.
6. Remove the front inner cover.
7. Disconnect the harness connector (1) from the front cover unit.
8. Remove the fixing screw ST3X6 (1) from the front cover unit
hinge support.
9. Remove the hinge support from the frame.
10. Remove the fixing screws ST3X6 (6) from the front cover unit
support (3 each on the left and right side).
11. Remove the front cover unit from the frame.
CAUTION:
•
When removing the hinge from the front cover unit, watch for
a spring rebound.
•
Hold the fixture and remove the hook from the frame.
4-84
Service Manual
"Optical Unit (Printhead Scanner
4-44, for more
"Front Cover Removal" on