Image Cartridge/Pc (I/C) Thermistor (Th2) Removal; Image Transfer Unit Removal - Lexmark Optra W810 Service Manual

4023-001

Image Cartridge/PC (I/C) Thermistor (TH2) Removal

1. Remove the image transfer roller. (See
Removal" on page
2. Remove the I/C thermistor (TH2). (1 screw, 1 connector)

Image Transfer Unit Removal

1. Raise the right cover release lever and open the right cover.
2. Remove two projections (2) and the image transfer unit (1). (4
connectors)
Note: Because the harness is short, slightly raise the image
transfer unit (1) and unplug the connector before attempting to
remove the image transfer unit (1).
4-22
Service Manual
4-21.)
"Image Transfer Roller