5024-001
Oil Sensor (OIL) Removal
1. Remove the fuser unit.
2. Remove the side cover (L). See
page
4-10, for more information.
3. Remove the side cover (L). See
on page
4. Remove the top cover assembly. See
Removal" on page
5. Remove the controller case 'A' assembly. See
Unit (Low Voltage Power Supply - LVPS) Removal" on
page
4-30, for more information.
6. Disconnect the oil sensor connector.
7. Remove the set screws ST3X6 (2) from the oil sensor.
8. Remove the oil sensor.
4-11, for more information.
4-12, for more information.
"Side Cover (L) Removal" on
"Side F Cover (L) Removal"
"Top Cover Assembly
"Power Supply
Repair Information
4-69