5024-001
Base Cover (L) Removal
1. Remove the side cover (L). See
page
4-10, for more information.
2. Remove the set screws BT4X10 (2) from the base cover (L).
3. Remove the base cover (L) from the base.
a. Pull and remove the rear side.
b. Pull and remove the front side.
WARNING:
•
When assembling the base cover, insert the leading edge of
the base cover (L) into the hooks (2) provided at the bottom
(left and right) of the base plate.
4-20
Service Manual
"Side Cover (L) Removal" on