5024-001
Paper Empty Sensor (PEU) / OHP Sensor (OHP)
Removal
1. Remove the transfer unit. See
page
4-79, for more information.
2. Remove the set screws ST3X6 (2) from the paper guide (L).
3. Remove the paper guide (L).
4. Remove the set screws ST3X6 (2) from the paper guide
assembly (UL).
5. Remove the connector from the sensor.
6. Remove the paper guide assembly (UL).
7. Remove the paper empty sensor (PEU) from the paper guide
assembly (UL), or remove the set screws BT3X8 (2) from the
OHP sensor (OHP) and the paper guide assembly (UL).
8. Remove the OHP sensor (OHP).
"Transfer Unit Removal" on
Repair Information
4-65