5024-001
Duplex Motor 2 Removal
1. Remove paper guide bottom and the side cover low (L). See
"Duplex Paper Guide Bottom Removal" on page 4-119
"Duplex Side Cover Low (L) Removal" on page
more information.
2. Remove the motor harness connector CN7 from the relay
P.W.B.
3. Remove the harness cover, and remove the harness from the
clamp.
4. Remove the protective cover.
5. Remove the belt from the motor shaft.
6. Remove the set screws ST3X5 (2) from the motor.
7. Remove the motor from the frame.
4-106, for
Repair Information
and
4-129