Print Tests - Lexmark C720 Service Manual

5024-001

Print Tests

The purpose of the diagnostic print tests is to verify that the printer
can print on media from each of the installed input options.
For each input source selected, the following choices are available:
Single (prints the print test page once).
Continuous (continue printing the print test page until Return or Stop
is pressed).
•
Tray 1 = single, Tray 1 = continuous
•
Tray 2 = single, Tray 2 = continuous (if installed)
The contents of the print test page vary depending on the media
installed in the selected input source. If a source is selected that
contains paper, legal, letter and so on, a page similar to the quick
test page is printed. However, the page does not contain the print
registration diamonds.
If Continuous is selected, all sources printing print the same page
continuously until the test is stopped. If continuous is selected for a
source containing envelopes, the envelope print test pattern prints
on the first envelope and subsequent envelopes are blank.
Note: The print test page may be printed on any paper size,
however more than one sheet of some media sizes may be required.
The print test page is always single sided, regardless of duplex
settings or the presence of the duplex unit.
To run the print test page:
1. Select Print Tests from the diagnostic menu.
2. Select the media source.
3. Select Single or Continuous.
3-8
Service Manual