Paper Empty Sensor And Spring Removal - Lexmark 2380 - Forms Printer B/W Dot-matrix Service Manual

Paper Empty Sensor And Spring Removal

1. Remove the tractor assembly
see "Push Tractor Assembly Removal" on page
2. Remove the top cover
see "Top Cover Removal" on page
3. Remove the print unit see
4. Remove the paper select lever
see "Paper Select Lever Removal" on page
5. Release the four latches [1], and then remove the paper empty
sensor. Carefully remove the paper empty sensor cable to avoid
cable damage.
6. Disconnect the paper empty sensor cable from the latch on the
paper guide.
7. Carefully grasp the paper empty lever at [2] with a pair of needle
nose pliers and remove the paper empty lever by pulling it
perpendicular away from the paper guide. Do not damage or
lose the paper empty sensor spring [3].
8. Detach the paper empty sensor spring [3].
4-36
4-61.
"Print Unit Removal" on page
4-53.
4-47.
4-42.