Paper Present Sensor Flag Removal - Lexmark B2650 Service Manual

Paper present sensor flag removal
1
Remove the rear cover. See
2
Remove the power supply. See
3
Remove the duplex. See
4
Remove the screw (A).
5
Lift the pick roller assembly, and then rotate the sensor flag to remove it.
Installation notes:
a
Lift the pick roller assembly.
b
Install the flag as shown.
Notes:
•
Make sure that the bar (A) is between the fingers of the flag (B).
•
Make sure that the two bosses (C) are inside the holes.
•
Make sure that the finger (D) is aligned with the sensor (E).
"Rear door and cover removal" on page
"Power supply removal" on page
"Duplex assembly removal" on page
Parts removal
234.
216.
218.
A
228
4600-830, -835, -895