Dhcp Relay Interface Settings - D-Link DAS-3626 User Manual

DHCP Relay Interface Settings

This window allows the user to set up a server, by IP address, for relaying DHCP information to the switch. The user
may enter a previously configured IP interface on the switch that will be connected directly to the DHCP/BOOTP
server using the following window. Properly configured settings will be displayed in the DHCP Relay Interface Table
at the bottom of the following window. The user may add up to four server IP's per IP interface on the switch.
To view this window, click System Configuration > DHCP/BOOTP Relay > DHCP/BOOTP Relay Interface Settings
as shown below:
Figure 42. DHCP/BOOTP Relay Interface Settings and DHCP/BOOTP Relay Interface Table menu
The following parameters may be configured or viewed:
Parameter
Interface
Server IP
Click Apply to implement changes made.
DAS-3626 VDSL2 Switch User Manual
Description
The IP interface on the switch that will be connected directly to the Server.
Enter the IP address of the DHCP server. Up to four server IPs can be configured per IP
Interface.
39