6000 W Power Supply Ac Power Cords - Cisco 6509 - Catalyst Chassis Switch Installation Manual

6000 W AC-Input Power Supply
Table A-19 6000 W AC-Input Power Supply Specifications (continued)
Specification
Front panel LEDs
•
•
•
Weight
1. The power supply is limited to 4000 W when installed in a Catalyst 6506, Catalyst 6509, and Catalyst 6509-NEB chassis.

6000 W Power Supply AC Power Cords

Table A-18
power supply. Included in the table are references to illustrations of the power cords.
Table A-20 6000 W Power Supply AC Power Cords
Locale
Australia, New Zealand CAB-AC-16A-AUS=
People's Republic of
China
Continental Europe
International
Israel
Japan, North America
(nonlocking plug)
200–240VAC operation
Catalyst 6500 Series Switches Installation Guide
A-46
INPUT OK 1 and INPUT OK 2
FAN OK
OUTPUT FAIL
lists the specifications for the AC power cords that are available for the 6000 W AC-input
Power Cord
Part Number
CAB-AC16A-CH=
CAB-AC-2500W-EU=
CAB-AC-2500W-INT=
CAB-AC-2500W-ISRL=
CAB-AC-2500W-US1=
Description
• Green—Source voltage is OK. (Input voltage is
85 VAC or greater.)
• Off—Source AC voltage falls below 70 VAC, is
not present, or the power supply is turned off.
Green—Power supply fan is operating properly.
•
Off—Power supply fan failure is detected.
•
Red—Problem with one or more of the DC-output
•
voltages of the power supply.
Off—DC-output voltages within acceptable
•
margins.
25.4 lb (11.5 kg)
Source Plug Type Cordset Rating
AU20S3 16 A, 250 VAC
GB16C 16 A, 250 VAC
CEE 7/7 16 A, 250 VAC
IEC 309 16 A, 250 VAC
SI16S3 16 A, 250 VAC
NEMA 6-20 16 A, 250 VAC
Appendix A Power Supply Specifications
Power Cord
Reference
Illustration
Figure A-43
Figure A-34
Figure A-38
Figure A-39
Figure A-31
Figure A-40
OL-5781-04