2500 W Ac-Input And Dc-Input Power Supplies - Cisco 6509 - Catalyst Chassis Switch Installation Manual

Installation guide
Table of Contents

Advertisement

2500 W AC-Input and DC-Input Power Supplies

2500 W AC-Input and DC-Input Power Supplies
The 2500 W AC-input power supply (WS-CAC-2500W) and 2500 W DC-input power supply
(WS-CDC-2500W) are supported in the following Catalyst 6500 series switches:
The 2500 W power supplies, shown in
1000 W, 1300 W, 3000 W, 4000 W, and 6000 W AC-input power supplies.
With a fully populated Catalyst 6513 switch, two 2500 W power supplies are not fully redundant. If you
Note
operate the 2500 W power supply at the low range input (100 to 120 VAC), it is not redundant in a fully
populated Catalyst 6509, Catalyst 6509-E, Catalyst 6509-NEB, or Catalyst 6509-NEB-A switch.
The 2500 W AC-input power supply needs 220 VAC to deliver 2500 W of power. When powered with
Note
110 VAC, it delivers only 1300 W. In addition, the power supply needs 16 A, regardless of whether it is
plugged into 110 VAC or 220 VAC.
Figure A-9
Cable
retention
device
Power
switch
Catalyst 6500 Series Switches Installation Guide
A-22
Catalyst 6506
Catalyst 6506-E
Catalyst 6509
Catalyst 6509-E
Catalyst 6509-NEB
Catalyst 6509-NEB-A
Catalyst 6513
2500 W AC-Input Power Supply
AC power
connection
I
0
INPU T
OK
Status LEDs
Captive installation
screw
Figure A-9
and
Figure
FAN
OUT PUT
OK
FAIL
Appendix A
Power Supply Specifications
A-10, share the same form factor as the
OL-5781-04

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ws-c6506Catalyst 6500 series

Table of Contents