Conventions - Cisco 6509 - Catalyst Chassis Switch Installation Manual

Conventions

Chapter
Appendix B
Appendix C
Appendix D
Appendix E
Conventions
This publication uses the following conventions:
Convention
boldface font
italic font
[ ]
{ x | y | z }
[ x | y | z ]
string
Catalyst 6500 Series Switches Installation Guide
xii
Title
Transceivers, Module
Connectors, and Cable
Specifications
Repacking the Switch
Chassis and Module
Power and Heat Values
Troubleshooting
Description
Commands, command options, and keywords are in
boldface.
Arguments for which you supply values are in italics.
Elements in square brackets are optional.
Alternative keywords are grouped in braces and
separated by vertical bars.
Optional alternative keywords are grouped in brackets
and separated by vertical bars.
A nonquoted set of characters. Do not use quotation
marks around the string or the string will include the
quotation marks.
Description
Gives brief descriptions of the copper and optical
transceiver modules, physical connectors, and the cables
used with the Catalyst 6500 series switches.
Provides procedures to repack your Catalyst 6500 series
switch if you need to return it to the factory.
Provides listings of the power consumption and heat
dissipation values for the Catalyst 6500 series switch
chassis and modules.
Provides troubleshooting guidelines for the initial
hardware installation and suggests steps to help isolate
and resolve problems.
Preface
OL-5781-04