Installing The Stabilizer Bracket Kit; Installing The Stabilizer Kit - Cisco 6509 - Catalyst Chassis Switch Installation Manual

Installing the Stabilizer Kit

Installing the Stabilizer Kit
The stabilizer kit is included only in the accessory kits for the Catalyst 6509-NEB,
Note
Catalyst 6509-NEB-A, and the Catalyst 6513 switches.
If you are not installing a Catalyst 6509-NEB, Catalyst 6509-NEB-A, or Catalyst 6513 switch in a rack,
you must install stabilizer brackets to the bottom of the chassis. The stabilizer brackets reduce the
possibility that the freestanding switch chassis will tip over.
Open the stabilizer kit package, and use the kit contents list in
included.
Table 3-2
Quantity
16
2
You will need the assistance of a second person to perform this installation.
Note
Catalyst 6500 Series Switches Installation Guide
3-16
Stabilizer Kit Contents
Part Description
M4 Phillips countersunk-head screws
Stabilizer brackets
Chapter 3 Installing the Switch
Table 3-2 to verify that all parts are
Received
OL-5781-04