Cisco 6509 - Catalyst Chassis Switch Installation Manual page 78

Catalyst 6513 Switch
Table 1-20 Catalyst 6513 Switch Specifications (continued)
Item
Physical Characteristics
Dimensions (H x W x D)
Weight
Airflow
1. RU = rack units
Catalyst 6500 Series Switches Installation Guide
1-54
Specification
• 33.3 x 17.2 x 18.1 in. (84.6 x 43.7 x 46.0 cm).
Chassis requires 20 RU
•
The Catalyst 6513 switch chassis is designed to install in standard
•
19-inch equipment racks that meet ANSI/EIA 310-D, IEC 60297, and
ETS 300-119 standards.
Chassis fully configured with 2 supervisor engines, 11 switching modules,
and 2 power supplies: 280 lb (127 kg).
WS-C6K-13SLOT-FAN (Standard fan tray)—641 CFM
•
WS-C6K-13SLT-FAN2 (Optional high-speed fan tray)—1090 CFM
•
To maintain proper air circulation through the Catalyst switch
Note
chassis, we recommend that you maintain a minimum 6-inch
(15 cm) separation between a wall and the chassis air intake or
a wall and the chassis air exhaust. You should also allow a
minimum separation of 12 inches (30.5 cm) between the hot air
exhaust on one chassis and the air intake on another chassis.
Failure to maintain adequate air space can cause the chassis to
overheat and the system to fail. On Catalyst chassis in which the
airflow is from front to back, the chassis may be placed
side-by-side.
1
.
Chapter 1 Product Overview
OL-5781-04