Cisco 6509 - Catalyst Chassis Switch Installation Manual page 174

Removing and Installing the DC-Input Power Supplies
Loosen the captive installation screw on the power supply. (See
Step 7
Use both hands to install and remove power supplies. The 4000 W DC-input power supply weighs
Caution
32 pounds (14.5 kg).
Grasp the power supply handle with one hand, and slide the power supply part of the way out of the
Step 8
chassis. Place your other hand underneath the power supply, as shown in
power supply completely out of the chassis.
Figure 4-26 Handling a 4000 W DC-Input Power Supply
0
If the power supply bay is to remain empty, install a blank power supply filler plate (Cisco part number
Step 9
700-03104-01) over the opening, and secure it with the captive installation screws.
Catalyst 6500 Series Switches Installation Guide
4-34
I
INPU T OK
FAN OUTP UT
1
2
3 OK FAIL
Chapter 4 Removal and Replacement Procedures
Figure 4-25.)
Figure 4-26, and slide the
OL-5781-04