Cisco 6509 - Catalyst Chassis Switch Installation Manual page 60

Catalyst 6509-E Switch
Table 1-14 Catalyst 6509-E Switch Specifications
Item
Environmental
Temperature, operating
Temperature, nonoperating
and storage
Thermal transition
Humidity (RH), ambient
(noncondensing) operating
Humidity (RH), ambient
(noncondensing)
nonoperating and storage
Altitude, operating
Shock and vibration
Acoustic Noise
Catalyst 6500 Series Switches Installation Guide
1-36
Specification
Certified for operation: 32° to 104°F (0° to 40°C)
Designed and tested for operation: 32° to 130°F (0° to 55°C)
Note The Catalyst 6500 series switches are equipped with internal air
temperature sensors that are triggered at 40°C (104°F) generating a
minor alarm and at 55°C (131°F) generating a major alarm.
–4° to 149°F (–20° to 65°C)
0.5°C per minute (hot to cold)
0.33°C per minute (cold to hot)
5% to 90%
5% to 95%
Certified for operation: 0 to 6500 feet (0 to 2000 m)
Designed and tested for operation: –200 to 10,000 feet (–60 to 3000 m)
This switch complies with Network Equipment Building Systems (NEBS)
(Zone 4 per GR-63-Core) in the following areas:
Earthquake environment and criteria
•
Office vibration and criteria
•
• Transportation vibration and criteria
Shock
Operational—5 G 30 ms, half-sine (IEC 68-2-27)
•
Non-operational—20 G, 7.5 ms, trapezoidal
•
Vibration
Operational—3 Hz to 500 Hz,
Power Spectral Density (PSD)-0.0005 G
5 dB/octave roll off at each end. 0.5 hours per axis (1.12 Grms).
67 dB. International Organization for Standardization (ISO) 7779:
Bystander position operating to an ambient temperature of 86°F (30°C).
Chapter 1
2
/Hz at 10 Hz and 200 Hz.
Product Overview
OL-5781-04