Repacking the Switch
If you need to return or move the Catalyst 6500 series switch chassis, follow these steps to repack the
switch using the original packaging material:
Step 1
Set the chassis in the bottom pallet. (See
Place the packing bag over the chassis.
Step 2
Step 3
Place the front-packing material and power supply packing material around the chassis.
Place the power supplies in the spaces provided in the power supply packing material. (See
Step 4
Step 5
Place the top-packing material over the top of the chassis and power supplies.
Place the rack-mount kit and the accessory kit on the top-packing material.
Step 6
Note
Place the outside carton over the entire package.
Step 7
Fold the outside carton down over the top and seal with packing tape.
Step 8
Step 9
Wrap three packing straps tightly around the top and bottom of the package to hold the outside carton
and the bottom pallet together. (See
OL-5781-04
You must include the accessory kit for the final packaging to fit properly.
A P P E N D I X
Figure
C-1.)
Figure
C-2.)
Catalyst 6500 Series Switches Installation Guide
C
Figure
C-1.)
C-1