Cisco 6509 - Catalyst Chassis Switch Installation Manual page 70

Catalyst 6509-NEB-A Switch
Table 1-17 Catalyst 6509-NEB-A Switch Features (continued)
Feature
Fan Tray
Power Supply
Catalyst 6500 Series Switches Installation Guide
1-46
Description
Supports two hot-swappable fan trays. These fan tray models are
•
supported:
FAN-MOD-09 (High-speed fan tray—760 CFM). Supports
–
Supervisor Engine 1, Supervisor Engine 2, Supervisor Engine 32,
and Supervisor Engine 720.
The fan tray contains four individual fans. The individual fans
Note
are not field replaceable. You must replace the fan tray.
Fan tray STATUS LED
•
Red—One or more individual fans have failed.
–
Green—Fan tray is operating normally.
–
• Supports one or two power supplies. The following models are
supported:
– WS-CAC-2500W (2500 W AC-input power supply).
WS-CDC-2500W (2500 W DC-input power supply).
–
WS-CAC-3000W (3000 W AC-input power supply).
–
WS-CAC-4000W-US (4000 W AC-input power supply).
–
WS-CAC-4000W-INT (4000 W AC-input power supply).
–
PWR-4000-DC (4000 W DC-input power supply).
–
WS-CAC-6000W (6000 W AC-input power supply).
–
• Installed power supplies can be of different ratings. Installed power
supplies can also be both AC-input, both DC-input, or one AC-input and
one DC-input. Power supplies can be configured in either redundant or
non-redundant mode.
All Catalyst 6500 series AC-input power supplies require single-phase
•
source AC. Source AC can be out of phase between multiple power
supplies or multiple AC-power plugs on the same power supply because
all AC power supply inputs are isolated.
Chapter 1 Product Overview
OL-5781-04