Download Print this page

HP 5830 Series Configuration Manual: Snmp Login Control Configuration Example

Hide thumbs

Advertisement

Step
5.
Apply the ACL to an
SNMP community, group
or user.

SNMP login control configuration example

Network requirements
As shown in
Figure 24 Network diagram
Command
Figure
24, configure the device to allow only NMS users from Host A and Host B to access.
SNMPv1/v2c community:
snmp-agent community { read | write }
community-name [ mib-view view-name ]
[ acl acl-number | acl ipv6
ipv6-acl-number ] *
SNMPv1/v2c group:
snmp-agent group { v1 | v2c }
group-name [ read-view read-view ]
[ write-view write-view ] [ notify-view
notify-view ] [ acl acl-number | acl ipv6
ipv6-acl-number ] *
SNMPv3 group:
snmp-agent group v3 group-name
[ authentication | privacy ] [ read-view
read-view ] [ write-view write-view ]
[ notify-view notify-view ] [ acl acl-number
| acl ipv6 ipv6-acl-number ] *
SNMPv1/v2c user:
snmp-agent usm-user { v1 | v2c }
user-name group-name [ acl acl-number |
acl ipv6 ipv6-acl-number ] *
SNMPv3 user:
snmp-agent usm-user v3 user-name
group-name [ [ cipher ]
authentication-mode { md5 | sha }
auth-password [ privacy-mode { 3des |
aes128 | des56 } priv-password ] ] [ acl
acl-number | acl ipv6 ipv6-acl-number ] *
61
Remarks
For more information about
SNMP, see Network
Management and
Monitoring Configuration
Guide.

Advertisement

   Also See for HP 5830 Series

   Related Manuals for HP 5830 Series

Comments to this Manuals

Symbols: 0
Latest comments: