Updating The List Of Manager Ip Addresses; Requirements; Selecting The San/Iq Software Network Interface And Updating The List Of Managers - HP StorageWorks P4000 User Manual

2. Open the tree, and select the TCP/IP Network category.
3. Select the Communication tab to bring that window to the front.
Figure 46 Selecting the SAN/iQ software network interface and updating the list of managers
.
4. Select an IP address from the list of Manager IP Addresses.
5. Click Communication Tasks, and select Select SAN/iQ Address.
6. Select an Ethernet port for this address.
7. Click OK.
Now, this storage system connects to the IP address through the Ethernet port you selected.

Updating the list of manager IP addresses

Update the list of manager IP addresses to ensure that a manager running on this storage system is
communicating correctly with all managers in the management group.

Requirements

Each time you update the list of managers, you must reconfigure application servers that use the
management group to which this storage system belongs. Only update the list mode if you have
reason to believe that there is a problem with the communication between the other managers in the
group and the manager on this storage system.
1. In the navigation window, select a storage system, and log in.
2. Open the tree, and select the TCP/IP Network category.
108 Managing the network