Checking Status Of Dedicated Boot Devices; Checking Boot Device Status; Getting There; Availability Tab - HP StorageWorks P4000 User Manual

San solution
Hide thumbs Also See for StorageWorks P4000:
Table of Contents

Advertisement

Figure 8 Availability tab
.

Checking status of dedicated boot devices

Some storage systems contain either one or two dedicated boot devices. Dedicated boot devices may
be compact flash cards or hard drives. If a storage system has dedicated boot devices, the Boot
Devices tab appears in the Storage configuration category. Storage systems that do not have dedicated
boot devices will not display the Boot Devices tab.
In storage systems with two dedicated boot devices, both devices are active by default. If necessary,
compact flash cards can be deactivated or activated using the buttons on this tab. However, you
should only take action on these cards if instructed by HP Technical Support.

Checking boot device status

View dedicated boot device status in the Boot Devices tab window in the Storage category in the
storage system tree.

Getting there

1.
Select a storage system in the navigation window and log in if necessary.
2.
Open the tree below the storage system and select Storage.
3.
Select the Boot Devices tab.
The status of each dedicated boot device on the storage system is listed in the Status column.
8
on page 51 describes the possible status for boot devices.
50
Working with storage systems
Table

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Storevirtual 4000

Table of Contents