Getting There; Reading The Disk Report On The Disk Setup Tab; Example Of Columns In The Disk Setup Tab; Disk Management Tasks For Storage Systems - HP StorageWorks P4000 User Manual

CAUTION:
The IBM x3650 does not support hot-swapping disk drives.
Hot-swapping drives is not supported for RAID 0 on any storage system.
Table 13 Disk management tasks for storage systems
Disk setup function
Monitor disk information
Power on or off a disk

Getting there

1. In the navigation window, select a storage system.
2. Select the Storage category in the tree below it.
3. Select the Disk Setup tab.

Reading the disk report on the Disk Setup tab

The Disk Setup tab provides a status report of the individual disks in a storage system.
Figure 12 shows the Disk Setup tab and
report.
Figure 12 Example of columns in the Disk Setup tab
.
62 Storage Configuration: Disk RAID and Disk Management
Model where available
All
IBM x3650
Table 14 on page 63 describes the corresponding disk