Powering Off The Storage System; Confirming Storage System Power Off - HP StorageWorks P4000 User Manual

5. Click OK.
The storage system starts the reboot in the specified number of minutes. The reboot takes several
minutes.
6. Search for the storage system to reconnect the CMC to the storage system once it has finished
rebooting.
See "Finding the storage

Powering off the storage system

1. Log in to the storage system.
2. Select Storage System Tasks on the Details tab and select Power Off or Reboot.
3. Select Power Off.
The button changes to Power Off.
4. In the minutes field, type the number of minutes before the powering off should begin.
Enter any whole number greater than or equal to 0. If you enter 0, the storage system powers
off shortly after you complete
NOTE:
If you enter 0 for the value when powering off, you cannot cancel the action. Any value
greater than 0 allows you to cancel before the power off actually takes place.
5. Click Power Off.
Figure 7 Confirming storage system power off
.
Depending on the configuration of the management group and volumes, your volumes and
snapshots can remain available.
systems" on page 33.
Step 5.
P4000 SAN Solution user guide 45