Disabling The Snmp Agent - HP StorageWorks P4000 User Manual

6. Click OK.
The entry appears in the Access Control list.
7. Click OK in the Edit SNMP Settings window to finish.
Editing access control entries
After installing version 8.5 or later, by default, access control is open from any system using the
"public" community string. This access control entry is listed as "default." If you delete this entry and
want to add it back in, use the By Name option and enter "default" as the name.
1. In the navigation window, log in to the management group.
2. In the tree, select Events > SNMP.
3. Click SNMP Tasks, and select Edit SNMP General Settings.
4. Select the Access Control entry from the list.
5. Click Edit.
6. Change the appropriate information.
7. Click OK.
8. Click OK on the Edit SNMP Settings window when you are finished.
Deleting access control entries
1. In the navigation window, log in to the management group.
2. In the tree, select Events > SNMP.
3. Click SNMP Tasks and select Edit SNMP General Settings.
4. Select a client listed in the Access Control list and click Delete.
A confirmation message opens.
5. Click OK.
6. Click OK on the Edit SNMP Settings window when you are finished.

Disabling the SNMP agent

Disable the SNMP Agent if you no longer want to use SNMP applications to monitor your network
of storage systems.
Disabling SNMP
1. In the navigation window, log in to the management group.
2. In the tree, select Events > SNMP.
3. Click SNMP Tasks, and select Edit SNMP General Settings.
4. Select Disable SNMP Agent.
Note that the Agent Status field shows disabled now. The SNMP client information remains listed,
but cannot be used.
132 Monitoring and reporting