Performance Monitor Graph; Performance Monitor Graph; Performance Monitor Table; Performance Monitor Table - HP StorageWorks P4000 User Manual

Performance monitor graph

The performance monitor graph shows a color-coded line for each displayed statistic.
Figure 113 Performance Monitor graph
.
The graph shows the last 100 data samples and updates the samples based on the sample interval
setting.
The vertical axis uses a scale of 0 to 100. Graph data is automatically adjusted to fit the scale. For
example, if a statistic value was larger than 100, say 4,000.0, the system would scale it down to
40.0 using a scaling factor of 0.01. If the statistic value is smaller than 10.0, for example 7.5, the
system would scale it up to 75 using a scaling factor of 10. The Scale column of the statistics table
shows the current scaling factor. If needed, you can change the scaling factor. For more information,
see "Changing the scaling
The horizontal axis shows either the local time or Greenwich Mean Time. The default setting is the
local time of the computer that is running the CMC. You can change this default to GMT. See
"Changing the sample interval and time
the management group time zone.)
For information about controlling the look of the graph, see

Performance monitor table

The performance monitor table displays a row for each selected statistic.
Figure 114 Performance Monitor table
.
The table shows information about the statistics selected for monitoring. The table values update based
on the sample interval setting.
To view the statistic definition, hold your mouse pointer over a table row.
factor" on page 286.
zone" on page 281. (This time zone setting is not related to
"Changing the graph" on page 285.
P4000 SAN Solution user guide 277