Viewing statistic details
In addition to what you see in a table row, you can see all of the details for a specific statistic in the
table, including the statistic definition.
1.
In the navigation window, log in to the management group.
2.
Select the Performance Monitor node for the cluster you want.
The Performance Monitor window opens.
3.
Right-click a row in the table and select View Statistic Details.
The Statistic Details window opens, with all of the information for the selected statistic that is in
the table, plus the statistic definition.
4.
Click Close.
Removing and clearing statistics
You can remove or clear statistics in any of the following ways:
•
Remove one or more statistics from the table and graph
•
Clear the sample data, but retain the statistics in the table
•
Clear the graph display, but retain the statistics in the table
•
Reset to the default statistics
Removing a statistic
You can remove one or more statistics from the table and graph.
1.
In the navigation window, log in to the management group.
2.
Select the Performance Monitor node for the cluster you want.
The Performance Monitor window opens.
3.
Right-click a row in the table, and select Remove Statistics.
Use the CTRL key to select multiple statistics from the table.
A message appears confirming that you want to remove the selected statistics.
4.
Click OK.
Clearing the sample data
You can clear all the sample data, which sets all table values to zero and removes all lines from the
graph. This leaves all of the statistics in the table and selected for display. The graph and table data
repopulate with the latest values after the next sample interval elapses.
1.
In the navigation window, log in to the management group.
2.
Select the Performance Monitor node for the cluster you want.
The Performance Monitor window opens.
3.
Right-click anywhere in the Performance Monitor window, and select Clear Samples.
284
Monitoring performance