5.
Click OK.
A warning message informs you that there may be a slight time lag for a reset to take effect.
6.
Click OK.
Editing the time zone only
You initially set the time zone when you create the management group. You can change the time
zone later, if necessary.
If you do not set the time zone for each management group, the management group uses GMT,
whether or not you use NTP. Files display the time stamp according to this local time zone.
1.
Click Time Tasks, and select Edit Time Zone.
2.
From the drop-down list, select the time zone in which this management group resides.
3.
Click OK.
Note the change in the Time column of the Time tab window.
114
Setting the date and time