Editing Remote Log Targets; Deleting Remote Logs; System Summary - HP StorageWorks P4000 User Manual

Editing remote log targets

You can select a different log file or change the target computer for a remote log:
1. Select a storage system in the navigation window and log in.
2. Open the tree below the storage system and select Diagnostics.
3. Select the Log Files tab.
4. Select the log in the Remote logs list.
5. Click Log File Tasks and select Edit Remote Log Destination.
6. Change the log type or destination and click OK.
7. Be sure that the remote computer has the proper syslog configuration.

Deleting remote logs

Delete a remote log when it is no longer used.
1. Select a storage system in the navigation window and log in.
2. Open the tree below the storage system and select Diagnostics.
3. Select the Log Files tab.
4. Click Log File Tasks and select Delete Remote Log Destination.
A confirmation message opens.
5. Click OK.
NOTE:
After deleting a remote log file from the storage system, remove references to this log file from the
syslog configuration on the target computer.

System Summary

The System Summary has information about all of the storage systems on your network. You can
export the summary to a .csv file for use in a spreadsheet or database.
Information in the summary includes:
• Storage system information,
• Management group information,
• Network information,
• RAID information,
To export the summary:
1. Select Tasks > System Summary.
2. Click Export.
3. Select a location for the file.
Use the default file name or enter a new file name.
Chapter 2, page 39
Chapter
Chapter 4, page 79
Chapter 3, page 53
8, page 145
P4000 SAN Solution user guide 143