Replacing A Disk; Diagram Of The Drive Bays In A Hp Lefthand P4800 And Hp Storageworks P4800; Viewing The Disk Setup Tab In A Hp Lefthand P4800 And Hp Storageworks P4800 G2 - HP StorageWorks P4000 User Manual

Figure 28 Viewing the Disk Setup tab in a HP LeftHand P4800 and HP StorageWorks P4800 G2
.
Figure 29 Diagram of the drive bays in a HP LeftHand P4800 and HP StorageWorks P4800 G2
.

Replacing a disk

The correct procedure for replacing a disk in a storage system depends upon a number of factors,
including the RAID configuration, the data protection level of volumes and snapshots, and the number
of disks being replaced. Replacing a disk in a storage system that is in a cluster requires rebuilding
data either just on the replaced disk or, in the case of RAID 0, on the entire storage system.
Replacing a disk in a storage system includes the following basic steps.
70 Storage Configuration: Disk RAID and Disk Management