Performing Snmp Operations; Adding Snmp Manager Ip Addresses - HP XP20000/XP24000 Reference Manual

3 Performing SNMP Operations

This chapter covers adding and deleting an SNMP manager IP address, adding and deleting a
community name, along with adding and deleting a community IP address:
"Adding SNMP Manager IP Addresses" (page 14)
"Deleting SNMP Manager IP Addresses" (page 15)
"Adding a Community Name" (page 16)
"Deleting a Community Name" (page 17)
"Changing a Community Name" (page 17)
"Adding Community IP Addresses" (page 18)
"Deleting a Community IP Address" (page 19)
"Testing the SNMP Trap Report" (page 20)

Adding SNMP Manager IP Addresses

To add SNMP Manager IP addresses:
1. Log on to open Remote Web Console Main window. Change to Modify mode (see the HP
StorageWorks XP24000/XP20000 Remote Web Console User Guide if you need instructions).
2. Click Go – Environmental Settings – SNMP Information in the menu bar of Remote Web Console
Main window. The SNMP Information window is displayed (see
(page 11)).
3. Select the radio box of Ipv4 or Ipv6 and specify the version of the IP address you enter.
NOTE:
error message is displayed and the Ipv6 address is not set.
4. Enter desired numerical IP address in IP Address text box (see
Address (Top: Before Setting, Bottom: After Setting)" (page
5. Select Set. The new IP address is added to IP Address list, but the changes are not implemented.
14 Performing SNMP Operations
If the OS of SVP is Windows XP and you enter Ipv6 address and select Apply, an
"SNMP Information Tab"
"Adding SNMP Manager IP
15)).