Searching For The Bonded Storage System On The Network; Viewing A New Active-Passive Bond - HP StorageWorks P4000 User Manual

10. Click OK to confirm the TCP/IP changes.
A message opens, prompting you to search for the bonded storage system on the network.
Figure 39 Searching for the bonded storage system on the network
.
11. Search for the storage system by Host Name or IP address, or by Subnet/mask.
NOTE:
Because it can take a few minutes for the storage system to re-initialize, the search may fail
the first time. If the search fails, wait a minute or two and choose Try Again on the Network
Search Failed message.
12. Verify the new bond interface.
1. Bonded logical network interface
2. Physical interfaces shown as slaves
Figure 40 Viewing a new Active-Passive bond
.
The bond interface shows as "bond0" and has a static IP address. The two physical NICs now
show as slaves in the Mode column.
98 Managing the network