Performing Snmp Operations; Adding Snmp Manager Ip Addresses - HP StorageWorks XP20000/XP24000 - Disk Array Reference Manual

3 Performing SNMP Operations

This chapter covers adding and deleting an SNMP manager IP address, adding and deleting a
community name, along with adding and deleting a community IP address:

Adding SNMP Manager IP Addresses

Deleting SNMP Manager IP Addresses
Adding a Community Name
Deleting a Community Name
Changing a Community Name
Adding Community IP Addresses
Deleting a Community IP Address
Testing the SNMP Trap Report
Adding SNMP Manager IP Addresses
To add SNMP Manager IP addresses:
1. Log on to open Remote Web Console Main window. Change to Modify mode (see HP
StorageWorks XP24000/XP20000 Remote Web Console User's Guide if you need instructions).
2. Click Go
Main window. The SNMP Information window is displayed (see
3. Select the radio box of Ipv4 or Ipv6 and specify the version of the IP address you enter.
NOTE:
If the OS of SVP is Windows XP and you enter Ipv6 address and select Apply, an error
message is displayed and the Ipv6 address is not set.
4. Enter desired numerical IP address in IP Address text box (see
5. Select Set. The new IP address is added to IP Address list, but the changes are not implemented.
Environmental Settings SNMP Information in the menu bar of Remote Web Console
XP24000/XP20000 SNMP Agent Reference Guide
Figure 4 on page 14).
Figure 5 on page 18).
17