Diagtools; Setup (Bios) Utility; Accessing The Setup Utility - HP D5970A - NetServer - LCII Guía Del Usuario

Chapter 10
under Embedded LAN Controllers in the LAN A submenu
(Configuration > Embedded LAN Controllers > LAN A).
You must also install the Netserver Agent software from the HP Netserver
Navigator CD-ROM, and the AOL2 client software. Refer to the Netserver
Alert-On-LAN 2 User Guide available online on the HP Netserver Online
Documentation CD-ROM included with your system.

DiagTools

This utility provides an easy-to-use hardware diagnostic for Netserver verification,
burn-in, and rapid troubleshooting. It must first be copied to diskettes and then
executed from the diskettes.
NOTE
HP recommends using the HP DiagTools utility to verify all
Netserver functions are operating correctly, after completing all
the configuration topics. The HP DiagTools utility also
generates a text file containing the hardware detected and the
DiagTools test results. This text file, called a support ticket,
should be saved to a diskette and used for future reference,
especially by your support provider.

Setup (BIOS) Utility

The HP Netserver (BIOS) Setup Utility is used to configure the following
Netserver options:
User Preferences
Security
Configuration
Exit

Accessing the Setup Utility

The (BIOS) Setup Utility menu offers the choices listed above, and the
corresponding items are described in the topics below.
1. Turn on the monitor and the HP Netserver.
2. Start the Setup Utility by pressing the [F2] key, when the following
message appears on the boot screen.
Press <F2> to enter SETUP
Configuring the HP Netserver
89