13Alternative Rack Mounting (4-Post); Introduction - HP D5970A - NetServer - LCII Guía Del Usuario

13 Alternative Rack Mounting (4-Post)

Introduction

This chapter provides the instructions for mounting the HP Netserver in a
four-post (column) HP Systems rack. Figure 13-1 shows the Systems rack. If you
have the newer 4-post HP System/E or System/U racks, go to Chapter 8. If you
are mounting the Netserver in a 2-post non-HP rack, refer to Chapter 7, or see the
documentation in the appropriate rack accessory kit.
a
b
c
Characteristics of
HP System Rack:
d
a. 3-Cornered Columns
b. Fan-Only Vent
c. "HP Systems" Name Plate
d. EIA Units Marked by Triangles
e. Anti-Tip Foot Extends
e
Figure 13-1. HP System Rack
Out Front Only
113