HP D5970A - NetServer - LCII Guía Del Usuario page 55

Chapter 6
CAUTION Always wear a wrist-strap and use a static-dissipating work
surface connected to the chassis when handling components.
Ensure the metal of the wrist strap contacts your skin.
8. Open the ZIF (Zero Insertion Force) lever to allow removal of the
terminator installed in the processor socket. See Figure 6-3.
You need to pull the lever out away from the ZIF socket and then raise it to
a full 90 to the system board.
ZIF
Lever
NOTE
Retain the terminator for future use. The Netserver will not
operate properly if using only one processor with no terminator
installed in the second processor socket.
9. Lift the terminator out of the socket and place it on anti-static surface or
bag.
Terminator
Figure 6-3. Removing the Terminator
Installing an Additional Processor
Processor
Socket
49