Chapter 4
NOTE
You do not need to remove the system board from the
Netserver chassis to install or replace DIMMs.
5. Locate the DIMM slots on the system board. See Figures 4-1 and 4-2.
6. Loosen the two captive screws holding the air duct over the DIMM slots,
and remove the air duct. See Figure 4-1.
Figure 4-1. Removing the Air Duct
Installing Additional Memory
29
Need help?
Do you have a question about the D5970A - NetServer - LCII and is the answer not in the manual?
Questions and answers