HP D5970A - NetServer - LCII Guía Del Usuario page 56

Chapter 6
10. Align the second processor over the empty processor socket.
The socket has a triangle marking for pin-1 that should match the triangle
for pin-1 on the processor near the end of the ZIF lever. See Figure 6-4.
CAUTION
Ensure you the align pin-1 of the processor with pin-1 of the
processor socket or pin damage will occur.
11. Insert the second processor into the socket and close the ZIF lever to fully
seat the processor.
You should hear the ZIF lever click when it closes properly.
Figure 6-4. Installing the Processor on the System Board
50
Installing an Additional Processor
Pin-1
Marker