Removing And Replacing Workstation Components - HP Workstation x1100 Getting Started Manual

setting up and using your workstation

removing and replacing workstation components

3. Insert the cover flanges located on the bottom edge of the cover into
Figure 1-10 Replacing the Cover
Cover Flanges
4. Lock the cover using the key provided, if required. Reconnect all the
removing and replacing workstation components
Instructions for removing and replacing workstation components, such
as the power supply, can be found in the x1100 Technical Reference
located at this web site:
This web site contains a wide range of free information, including
downloadable documentation, service and support options, and the latest
versions of drivers and utilities.
28
their cover slots on the bottom edge of the workstation. See Figure
1-9. Next, close the cover by rotating it upward in the direction of the
arrow. You will hear the cover snap into place when the cover is
securely closed.
power and telecommunication cables.
www.hp.com/go/workstationsupport
Cover Slots
Chapter 1