Removing And Replacing The Hard Drive Scsi Backplane; Removing The Hard Drive Scsi Backplane; Opening The Fan Power Bridge; Disconnecting Scsi Cables - HP Rx2620-2 - Integrity - 0 MB RAM Service Manual

Removing and Replacing the Hard Drive SCSI Backplane

Removing the Hard Drive SCSI Backplane

1. Power off the server, disconnect all power and external cables, and remove the top metal
cover.
2. Lift up on the PCI cage release lever and the back edge of the PCI cage and lift the PCI cage
out of the server.
3. Lift up on the fan power bridge and disconnect the backplane power cable. See
Figure 4-63 Opening the Fan Power Bridge
4. Remove any installed hard drives.
5. Disconnect the SCSI cables and unscrew the backplane mounting screws. See
and Figure
Figure 4-64 Disconnecting SCSI Cables
90 Removing and Replacing Components
4-65.
Figure 4-63.
Figure 4-64