Example C-19 lanaddress Command
LAN Address Information:
LAN Address
-----------------
Mac(00306E4C4F1A)
*Mac(00306E4C0FF2)
monarch
Displays or modifies the ID of the bootstrap processor. The preferred monarch number is stored
in NVM.
Syntax
monarch <cpu>
Parameters
<cpu>
Operation
If specified with no parameters, monarch displays the Monarch processor for the server.
Specifying a processor number alters the preferred Monarch processor. None of these changes
takes affect until after a reboot.
Example C-20 monarch Command
Shell> monarch
Current
Monarch
-------
0
0
To view monarch: fs0 :\ monarch
-----------------+-----------
current status
next boot status |
To set the monarch processor to 1: fs0 :\ monarch 1
-----------------+-----------
current status
next boot status |
pdt
Displays or clears the contents of the Page Deallocation Table (PDT).
Syntax
pdt (clear)
Parameters
<clear>
160
Utilities
Path
----------------------------------------
Acpi(HWP0002,0)/Pci(3|0)/Mac(00306E4C4F1A))
Acpi(HWP0002,100)/Pci(2|0)/Mac(00306E4C0FF2))
specifies a cpu
Preferred
Monarch
Possible Warnings
---------
-----------------
0
0
| Processor
|
0
0
| Processor
|
0
1
clears the pdt