Standard Hp-Ux Booting - HP Rx2620-2 - Integrity - 0 MB RAM Service Manual

1. Access the EFI Shell environment.
a. To access the server console, log in to iLO and enter CO.
b. When accessing the console, confirm that you are at the EFI Boot Manager menu (the
main EFI menu). If you are at another EFI menu, choose Exit from the submenus until
you return to the screen with the EFI Boot Manager heading.
c. To access the EFI Shell environment, choose EFI Shell from the EFI Boot Manager menu.
2. Access the EFI System Partition (fsX: where X is the file system number) for the device
from which you want to boot HP-UX.
For example, enter fs2: to access the EFI System Partition for the bootable file system
number 2. The EFI Shell prompt changes to reflect the file system currently accessed.
The full path for the HP-UX loader is \EFI\HPUX\HPUX.EFI and it should be on the device
you are accessing.
3. At the EFI Shell environment, use the bcfg command to manage the boot options list.
The bcfg command includes the following options for managing the boot options list:
• bcfg boot dump — Display all items in the boot options list for the server.
• bcfg boot rm # — Remove the item number specified by # from the boot options
list.
• bcfg boot mv #a #b — Move the item number specified by #a to the position specified
by #b in the boot options list.
• bcfg boot add # file.efi "Description" — Add a new boot option to the position in
the boot options list specified by #. The new boot option references file.efi and is listed
with the title specified by Description.
For example, bcfg boot add 1 \EFI\HPUX\HPUX.EFI "HP-UX 11i"adds an
HP-UX 11i item as the first entry in the boot options list.
For details, see the help bcfg command.
4. Exit the console and iLO interfaces if you are finished using them.
To exit the server console and return to the iLO MP Main Menu, press Ctrl+B. To exit iLO,
enter X at the Main Menu.

Standard HP-UX Booting

Use either of the following procedures to boot HP-UX:
• "Booting HP-UX (EFI Boot Manager)" (page 127)
• "Booting HP-UX (EFI Shell)" (page 128)
Procedure B-2 Booting HP-UX (EFI Boot Manager)
From the EFI Boot Manager Menu, choose an item from the boot options list to boot HP-UX.
1. Access the EFI Boot Manager Menu for the server on which you want to boot HP-UX.
a. To access the server console, log in to iLO and enter CO.
b. When accessing the console, confirm that you are at the EFI Boot Manager menu (the
main EFI menu). If you are at another EFI menu, choose Exit from the submenus until
you return to the screen with the EFI Boot Manager heading.
c. To access the EFI Shell environment, choose EFI Shell from the EFI Boot Manager menu.
2. At the EFI Boot Manager menu, choose an item from the boot options list.
Each item in the boot options list references a specific boot device and provides a specific
set of boot options or arguments you use when booting the device.
3. Press Enter to initiate booting using the chosen boot option.
4. Exit the console and iLO MP interfaces when finished using them.
To exit the server console and return to the iLO MP Main Menu, press Ctrl+B. To exit the
iLO MP, enter X at the Main Menu.
Booting and Shutting Down HP-UX 127