Removing And Replacing The Hard Drive Backplane - HP Carrier-Grade rx2800 i2 Server DC User's & Service Manual

To replace the component, reverse the removal procedure.

Removing and replacing the hard drive backplane

1. Power off the server
2. Extend or remove the server from the rack
or "Extending the server from the rack" (page
3. Remove the access panel
4. Remove all hot-plug hard drives
97)).
5. Disconnect the SAS cable from the hard drive backplane.
6. Remove the hard drive backplane.
("Powering off the server" (page
("Removing the server from the rack" (page
("Removing the access panel" (page
("Removing and replacing a hot-plug SAS hard drive" (page
94)).
93)).
43)).
Removing and replacing the hard drive backplane 103
95))