HP Rx2620-2 - Integrity - 0 MB RAM Service Manual page 102

Enter alert level threshold or [Q] to quit filter setup: 3
-> Alert threshold level 3 filter will be applied.
Set up alert filter options on this buffer? (Y/[N])
Log Name
-------------------------------------------------------------------
E - System Event
Event Log Navigation Help:
+
-
<CR>
D
F
L
J
V
?
Ctrl-B
4. Select a, and a threshold filter number to filter events to the desired level.
MP:SL (+,-,<CR>,D, F, L, J, H, K, T, A, U, ? for Help, Q or Ctrl-B to Quit) >a
Alert Level Threshold Filter:
1 : Major Forward Progress
2 : Informational
3 : Warning
5 : Critical
7 : Fatal
Enter alert level threshold or [Q] to quit filter setup: 3
-> Alert threshold level 3 filter will be applied.
5. Select t to change the display to text mode:
Display Mode Configuration:
Current -> K - Keyword mode
Enter new value, or [Q] to Quit:
102 Troubleshooting
Entries
410
View next block
View previous block (backward in time, e.g. from 3 to 2)
Continue to the next or previous block
Dump the entire log for capture and analysis
First entry
Last entry
Jump to entry number
View mode configuration (text, keyword, hex)
Display this Help menu
Quit and return to the Main Menu
H - Hex mode
T - Text mode
% Full
47 % 18 Feb 2003 09:38:10
(forward in time, e.g. from 3 to 4)
Latest Entry