Operation; Errdump; Syntax; Parameters - HP Rx2620-2 - Integrity - 0 MB RAM Service Manual

Operation

Sets NVM and stable store values to predefined default values. Normally only a subset of values
are available for default. To reset the system, execute the default clear command.

errdump

Displays the contents of processor internal memory logged for all processors present in the server.

Syntax

errdump [cpe | cmc | init | la | clear]

Parameters

mca
cpe
cmc
init
la
clear
Operation
Enter errdump with no parameters to display usage. Otherwise, the specified error log displays.
Add -n to the clear parameter to disable the confirmation prompt. Access the errdump command
from the System Configuration menu.

info

Displays most server information.
Syntax
info [ -b] [target]

Parameters

target:
all
cpu
cache
mem
io
boot
chiprev
fw
sys
warning
dumps the Machine Check Abort error log
dumps the Corrected Platform Error log
dumps the Corrected Machine Check log
dumps the Initialization log
dumps the Logic Analyzer log
erases all of the logs (mca, cpe, cmc, init, la)
valid targets are:
display everything
display information on cpus
display information on cache
display information on memory
display information on io
display boot-related information
display information on chip revisions
display firmware version information
display system information
display warning and stop boot information
EFI/POSSE Commands 153