Introduction; Server Overview; Server Dimensions; Hp Integrity Rx2620 Server (Front View) - HP Rx2620-2 - Integrity - 0 MB RAM Service Manual

1 Introduction

The HP Integrity rx2620 server is a 2-socket server based on the Itanium® processor architecture.
The server supports the following operating systems: Microsoft Windows®, HP-UX, Linux, and
OpenVMS®. The server is available in either rack-mount or pedestal configurations. The server
accommodates up to 12 DIMMs and internal peripherals including disks and a DVD. Its high
availability features include hot-swap fans, power supplies, and hot-plug disk drives.

Server Overview

The HP Integrity rx2620 server chassis is a 2U Electronics Industry Association (EIA) enclosure,
which mounts in any standard 19-inch EIA rack. All external cabling connects from the rear of
the enclosure. With the server installed in the rack, service access is enhanced by the use of chassis
slides. The server has bays to accommodate 1 + 1 redundant, hot-swappable power supplies,
accessible from the front of the product. There are three low-profile hot swappable hard drives
accessible from the front, and a slim-line optical drive for a CD-R, CD-RW, DVD-R, or DVD+RW.
There are N + 1 redundant, hot-swappable server fans, all clearly identified and easily accessible.
Server status indication, a power switch, server locator switch, and LED are located in the front
within the bezel. A server locator switch and LED is in the back of the server for easy identification
in the rack. See
Figure 1-1 HP Integrity rx2620 Server (front view)
Figure 1-2 HP Integrity rx2620 Server (front view with bezel removed)
Figure 1-3 HP Integrity rx2620 Server (rear view)

Server Dimensions

Table 1-1 shows the dimensions and weight of the server.
Figure 1-1, Figure 1-2, and Figure 1-3 for front and back views of the server.
Server Overview 19