Cpuconfig; Syntax; Parameters; Operation - HP Rx2620-2 - Integrity - 0 MB RAM Service Manual

Example C-6 boottest Command
Shell> boottest
BOOTTEST Settings Default Variable
Selftest
-------------
booting_valid
early_cpu
late_cpu
platform
chipset
io_hw
mem_init
mem_test
Example C-7 boottest early_cpu off Command
Shell> boottest early_cpu off
BOOTTEST Settings Default Variable
Selftest
-------------
booting_valid
early_cpu
late_cpu
platform
chipset
io_hw
mem_init
mem_test

cpuconfig

Displays the configured or deconfigured state of processors in the system and enables you to
configure or reconfigure processors.

Syntax

cpuconfig <cpu> <on|off>

Parameters

<cpu>
<on|off>

Operation

Issuing cpuconfig with no parameters displays the config/deconfig status of all processors. To
reconfigure CPUs, specify a CPU number and a state on or off. If a valid state is entered and is
different from the current state of a CPU, its status changes on the next boot.
Setting
-------------------------
On (OS speedy boot aware)
Run this test
Run this test
Run this test
Run this test
Run this test
Run this test
Run this test
Setting
-------------------------
On (OS speedy boot aware)
Skip this test
Run this test
Run this test
Run this test
Run this test
Run this test
Run this test
specify a processor
state to set the processor to
EFI/POSSE Commands 149